434/710HP
 $16,600
434/710HP Small Block Chevy Drag Race Engine

  •    Dart Little "M" Block with 4 Bolt Splayed Caps
  •   HOOD/Eagle 4340 4.000" Stroke Steel Crank (1)
  •   Eagle 4340 6.000" H-Beam Steel Rods
  •   Clevite 77 "H" Series Main and Rod Bearings
  •   RaceTec 14.1 Pro Series Forged Pistons
  •   Total Seal Plasma Moly Ring Set
  •   Custom Grind Steel Billet Roller Cam
  •   Comp Cams Heavy Duty Solid Roller Lifters
  •   Rollmaster Billet Timing Set with IWIS Chain and Torrington Bearing
  •   AFR 227 Eliminator Heads with CNC Porting
  •   1.550" Roller Springs w/Retainers and 10° Locks 
  •   Head Studs with 12-Point Nuts
  •   Scorpion Race Series 1.6 Aluminum Roller Rockers
  •   FelPro HP Head Gaskets with Pre-Flattened Copper Wire
  •   Brodix Intake Manifold (2)
  •   Moroso Custom Stroker Oil Pan with Baffling
  •   Moroso Race Prepped Oil Pump with Tig Welded HD Pickup
  •   Champ Front Cover with Billet Timing Pointer
  •   SFI Approved Harmonic Balancer
  •   Complete Assembly Internally Balanced
  •   Individually Dyno Tested and Tuned
  •   Actual Dyno Sheet Provided 
Packages and Components
 MSD Crank Trigger Ignition Upgrade
$295.00
Vacuum Pump Kit Includes: Moroso 3 Vane Vacuum Pump and Adjustable Relief Valve, Breather Tank, AN Fittings, Jones Mandrel and Bracket Kit with Radius Tooth HTD Belt.
$1075.00
Available Options
Fuel System Components
Pro System 1150 CFM 4500 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs and Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.
$1,395.00
Pro System 1050 CFM 4500 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs and Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.
$1,395.00
Pro System 1040 CFM 4150 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs and Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.
$995.00
Pro System 950 CFM 4150 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs and Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.
$995.00
Black Cone Style 2" Spacer
$100.00
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump
$399.00
Igniton Components
MSD Electronic Ignition Package includes MSD 85705 Pro Billet Locked Distributor with Ford HEI-Style Cap, Bronze Gear, Custom MSD/Moroso 8.5mm Wire Set. Dyno Tested and Calibrated on your engine.
$595.00
MSD Crank Trigger Ignition Upgrade
$295.00
MSD 7AL-2 Electronic Ignition Box (Direct Plug-in For Our MSD Distributors)
$559.00
MSD 8201 Pro Power Coil
$122.00
Blocks
Brodix Aluminum Block with Steel Billet Caps, Special Head Stud Kit and Additional Machining (Slightly Less Peak HP)
$4,000.00
HIP® Process (Hot Isostatic Pressing) For Increased Durability With Aluminum Blocks
$500.00
Dart Steel Billet Main Cap Upgrade
$450.00
Crankshafts
Compstar/Molnar 4340 Non-Twist Forged and Nitrided Crank
$125.00
Connecting Rods
Molnar Severe Duty 4340 H-Beam Rods with ARP 2000 Asymmetrical Bolts
$400.00
Compstar/Molnar H-Beam 4340 Steel Rods with ARP 2000 Bolts
$300.00
ARP 2000 Rod Bolts
$125.00
Pistons, Pins, Rings, Bearings
Total Seal TNT "Hellfire" Rings
$175.00
Tool Steel "Heavy Wall" Wrist Pins
$225.00
Calico Coated Bearing Package
$150.00
Lifters
HIPPO Severe Duty Roller Lifters with Hi-Pressure Pin Oiling (Extended Lifter Life)
$295.00
HIPPO Severe Duty Pressure Fed Roller Lifters w/Solid Bushed Rollers (No Needle Bearings)
$595.00
Isky Red Zone Solid Roller Lifters with EZX "Needle Free" Bearing Option
$845.00
Valvetrain
Stud Girdle with CNC Machined 2-Piece Valvetrain Stabilizer and Locking Hex Head Adjusting Nuts
$295.00
T&D Shaft Rocker System
$1,395.00
Needle Bearing Tip Option for T&D Shaft Rockers
Timing
Jesel Belt Drive (Includes Mandatory Block Machining)
$1,145.00
Cloyes 2 Piece Aluminum Timing Cover
$150.00
Intake Manifolds
Edelbrock Super Victor Intake Manifold For 4150 Style Carburetors
Call for Pricing
Nitrous Systems
SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed and Installed
$1,500.00
SpeedTech Diffuser Plate Nitrous System - Installed
$795.00
Oil Pumps, Oil Pans, Vacuum Pump
Moroso Kickout Style Pro Pan with Solid Louvered Tray and Main Cap Partitions For Added Power and Oil Control.
$250.00
Moroso HD Billet Aluminum Oil Pump
$295.00
Vacuum Pump Kit Includes: Moroso 3 Vane Vacuum Pump and Adjustable Relief Valve, Breather Tank, AN Fittings, Jones Mandrel and Bracket Kit with Radius Tooth HTD Belt. 
$1,075.00
Accessories, Additional Parts, Labor
Cometic MLS (Multi Layered Steel) Head Gaskets
$95.00
ATI SFI Approved Super Damper Balancer (Includes Hone To Fit Labor)
$245.00
SFI Heavy Duty Flexplate and ARP Bolt Package
$125.00
JW "The Wheel" Severe Duty SFI Flex Plate
$269.00
Boninfante SFI Billet Flexplate and ARP Bolt Package
$395.00
PowerMaster Hi-Torque Mini Starter
$229.00
Meziere 55GPH Electric Water Pump
$450.00
Have a question? Give us a call!
Components / Parts Subject To Change Due To Availability.
Phone: (417)255-9950  Fax: (417)255-9750

1608 Sunset Terrace, West Plains, Missouri, 65775
Hours: Monday through Friday 8 a.m. - 5 p.m. CST
Like us on Facebook!